Firmware
(MINI3 Gen 2)
FAQs
Yes, the dash cam requires a connection to the KAWA AUTO APP for initial setup. After the dash cam starts recording normally, you can choose to turn off the Wi-Fi by pressing the button on the dash cam and exit the app.
Please check if Wi-Fi is enabled, try restarting both the dash cam and your phone, or reinstall the app.
Press the button on the dash cam five times to reset the device. The password will be restored to the default one.
Try connecting in an environment with minimal interference, or reset the device to factory settings and try again.
Yes, after the initial setup and authorization via the app, the dash cam will automatically start recording when it detects power. (If the device is reset, you will need to reconnect and authorize it again.)
You can view the videos in the "Ablum" section of the preview page in the app. Videos can also be downloaded to your phone’s local gallery.
Clean the lens, check the resolution settings, and make sure the lens is not blocked or reflecting light.
Parking means the engine is off, and without power supply, the device will automatically turn off. If you need the dash cam to continue working after parking, we recommend purchasing and installing a parking monitor cable.
Yes, but you need to ensure that the USB port provides 5V/1.5A power output.
You need to use an additional hardwiring kit connected to the car's fuse box. After proper installation, you can enable the parking monitor function in the app.
Yes, parking monitor videos are typically saved in the "Parking Monitor Videos" folder. Once the storage is full, older videos will be overwritten.
Yes, you can use voice commands to start recording, take pictures, and perform other functions. It supports six languages, and other languages can use voice commands in English.
Press the button on the device five times to reset the machine.
Go to the app's "Settings" > "Advanced Settings" > "Storage Resolution" to adjust the resolution options.
Yes, you can install it in different vehicles, but you will need to purchase the mounting accessories separately.
